The momentum of transformative technologies in transportation is unprecedented. Stories on advanced vehicles and infrastructure appear every day in popular media, highlighting our selected disruptive themes and applications. Yet, these disruptors will need considerable development over the next few decades, creating a high workforce demand. Transportation companies are recruiting from universities in increasing numbers (e.g., General Motors recently held a recruiting event at VTTI with over 300 hundred students), and new transportation job opportunities are abundant (e.g., Google has 36 jobs currently advertised for their self-driving car program). The Safe-D National UTC views this new demand as both as an opportunity and a responsibility to attract and prepare the next generation of transportation researchers and workers.
To build upon this existing interest and ensure that students see transportation as we do (as an exciting area for the application of next-generation and life-saving technologies), it is critical to connect with future transportation leaders at all stages of education and career development. Accordingly, Safe-D is committed to prioritizing education and workforce development by both leveraging existing programs at each university and creating entirely new projects and programs using UTC support.
In addition to requiring all Safe-D research projects to include significant student involvement, the Safe-D National UTC has set-aside funding for student support through various projects and programs. A description of the student projects supported by Safe-D is below.
Led by Mike Lukuc (TTI/TAMU)* and Andy Hwang (TAMU), this project supported a student in support of TxDOT project 0-6836 Commercial Truck Platooning. Under this project, the student funded by Safe-D is responsible for knowledge transfer of the current control algorithm from the vendor, coding that algorithm into a new model-based software architecture, and simulation-based software verification for the baseline and future algorithm iterations. This is a key component of an R&D path to utilize a simulation-based software development approach that improves efficiency by reducing time, complexity, risks, uncertainty and costs associated with testing highly dynamic, failure mode and crash-imminent platooning scenarios.
The report from TxDOT Project 0-6836: Commercial Truck Platooning—Level 2 Automation is available here.
This project supports a student in support of NCHRP Project 07-23 Access Management in the Vicinity of Interchanges and was led by Karen Dixon (TTI/TAMU)* and Maryam Shirinzadeh Dastgiri (TAMU). This project used a large volume of operational field data, micro-simulation data, and crash data to identify linkages between interchange design, driveway placement, and upstream major intersection location that affect corridor safety. The effort primarily focused on the diamond interchange configuration that is very common in the United States.The methods for determining corridor safety near interchanges can create challenges. Due to the large traffic volumes, varying travel times, widely varying geometric features of the interchange, and a variety of access management scenarios, it is a challenge to assess the data and determine if safety performance issues should be attributed to the interchange traffic, the driveway traffic, the upstream intersection traffic, or a combination of these operational features blended with the prevailing corridor geometrics. These unknown issues make improving safety at these locations a challenge. For this effort, the student used field collected travel time and volume information to develop validated micro-simulation models that depict actual site conditions. Each location will then undergo a safety assessment to identify what factors appear to be correlated with safety performance. These “base” models will then be modified to change access management techniques (add or change medians, increase or decrease access density, shorten or lengthen distance to nearest major intersection) and then assess how minor changes may influence the operational performance. Though safety cannot be directly extracted from this micro-simulation activity, performance measures attributed to safety for the “base” models will be identified and evaluated using a sensitivity analysis for the resulting large volume of data.The student funded by Safe-D is working with data collected for NCHRP project 07-23 but she is providing an added value by developing a method for determining vehicle weaving patterns in these interchange regions. This activity goes beyond the scope of the NCHRP project but builds upon it. The student’s work requires data mining using simulation data, video data, and travel time data (in some cases all merged together).
Within the CAST (Connected Autonomous Safe Transportation) Program, one of the projects is exploration to determine how an autonomous vehicle should respond to emergency vehicles on the road. There are three threads of investigations:
During the summer 2017, TTI/TAMU faculty (Sivakumar Rathinam (TAMU)*, Swaminathan Gopalswamy (TTI/TAMU), Geethik Narayana Kamineni, Zhiyong Yang, Sheelabhadra Dey) led students assigned to this project to complete the following tasks:
The end-goal of the summer work was to lead to a formal proposal for sustained research into this important safety consideration for autonomous vehicles, namely, how should the autonomous vehicles respond to emergency vehicles on the road. This project was ultimately funded by Safe-D (Safe-D Project 03-051: Response of Autonomous Vehicles to Emergency Response Vehicles). The project also resulted in a conference paper: Nayak, A. S. Dey, S. Rathinam, S. Gopalswamy,3rd Annual Texas A&M Transportation Technology Conference, May 2018 (Published).
TTI/TAMU researchers Chiara Silvestri-Dobrovolny (TTI/TAMU)*, Heather Sulaica (TAMU), and Johnathan Luke Wilson (TAMU) led this student project during the summer of 2017. The objectives of this project were to review and analyze existing crash data on motorcycle related accidents, as well as to conduct a detailed literature review on existing motorcycle testing standards and various protocols that foreign Countries have developed throughout the years. The students involved in this project have assisted with crash data review from the Texas CRIS database. They have analyzed motorcycle crash data that was recorded in the State of Texas and that occurred specifically on a Flyover-Connector road type or at a curve. In addition, the students reviewed available police narratives documents from the crashes which occurred on Flyovers or Connectors, to determine, when possible, the dynamic of the accident and to verify other detailed information that was not necessarily present in the crash data file. The students also utilized available computer programs to obtain pictures of those locations where the accidents occurred and complement missing information from the narratives. Students also performed a detailed international literature review of existing standards and protocols on motorcycle testing against roadside safety barriers, as well as of current practices of retrofitting existing roadside safety systems to enhance motorcycle rider safety. This UTC project provides the ability to perform detailed research and data investigation complementing an existing TxDOT project (490027-3 – internal #). The funded TxDOT project aimed at exploring design options for a retrofit concrete barrier system to be deployed at appropriate bridge locations to address errant motorcycle rider’s safety. The objective of this project includes the design, development, and evaluation through computer simulations of an improved retrofit barrier system(s) that has the capability to safely contain errant motorcycle riders during an impact event. As the project evolved, it was ultimately supported as a full research project (Safe-D Project TTI-Student-04), and is expected to generate a full report (expected to be finalized in Summer 2019).
In the Fall of 2018, a team of VT graduate students in Safe-D Director Zac Doerzaph’s Advanced Vehicle Safety Systems (BMES 5984) class were tasked with the challenge of developing a novel safety system to address a motor vehicle safety issue. This academic challenge produced the Pre Rear-End Positioning and Risk Extenuation System (PREPARES), a new system aimed at protecting the occupants of a struck vehicle in the case of an unavoidable rear-end collision. After the completion of the class project, the team decided that the system could be further developed and entered into an international competition through NHTSA. The Safe-D National UTC committed to supporting the students in their continued development of the system through federal and matching funding sources. PREPARES rapidly redirects the occupant’s attention in a manner that elicits optimal seating position in the milliseconds prior to impact, mitigating the effects of whiplash and other soft tissue injuries. The system relies on a compact array of sensors to reliably measure the position and velocity of vehicles approaching from behind. An algorithm pre-processes the raw sensor data, determines if the approaching vehicle is a collision threat, and issues a warning by comparing measured distance and velocity to predicted stopping distance. The warning interface consists of salient audible and visual components. The goal is to create a near-automatic human response that repositions the occupant’s torso and head into position for impact with the seat and headrest, based on eliciting a strong desire to quickly attend toward the alert.
On April 19, 2019, the PREPARES Student Team was also selected as a North American Region Winner for the Student Safety Technology Design Competition (SSTDC) of the Enhanced Safety of Vehicles (ESV) 26th International Technical Conference. The team will compete in the final, international competition in Eindhoven, Netherlands in June 2019.
The team also submitted a report to NHTSA for the SSTDC, which can be found here: PREPARES Report (pdf)
This project encompasses four different activities to explore safety applications of emerging crowd-sourced data and datasets available from commercial aggregators. The first activity examines systems used to monitor and count pedestrian activity. Developing crash rates for these vulnerable users depends on knowing the volume of activity. Data from metropolitan planning organizations as well as commercial and community-based reports of bicycle and pedestrian activity will be assessed for accuracy by comparing them to manual counts. The second activity will examine waypoint travel pattern data from a commercial data aggregator to determine its applicability to safety analyses. The evaluation will assess the geographic and temporal distribution and representativeness of the sample as well as how roadways of different functional classes are represented. The third activity will examine data from a crowd-sourced traveler information app to determine if incident reports in the app correspond to official incident records. The task will develop a data catalogue identifying data attributes, coverage areas, resolution of the data, and timeliness of the data. Overall these three exploratory efforts will provide future research projects an understanding of what is available from these new big data sources and how they could be used to improve safety. As the project evolved, it was ultimately supported as a full research project (Safe-D Project TTI-Student-05), and is expected to generate a full report (expected to be finalized in Fall 2019).